Medium Voltage Power Cable

Manufacturing Specifications

All the national and international specifications IEC, AS/NZS, BS, ICEA, TCVN or any others.

Conductor
Copper or aluminum round compacted circular or segmental compacted circular according to the international specifications IEC 60228 or any customer’s specification.

Insulation
The insulation material is made from cross-linked polyethylene.
The conductor screen, insulation and insulation screen are extruded simultaneously in one process to ensure that they are free from all possibilities of voids between layers.
The extrusion process is carried out under strictly controlled atmospheric condition and X-Ray system.

In some special cases, tree-cross-linked polyethylene shall be used where required by customer.

Screening
Copper tape ( or copper wire or lead sheath where required) shall be applied over insulation screen

Bedding/Separation
Polyethylene (PE) or Polyvinyl chloride (PVC).

In case there is no requirement of armouring layer, the jacket shall be applied over screen.

Armouring
The protection the cable from mechanical stresses is achieved by the armouring of steel wires or steel tapes.

If the cables are single core and are destined to be used in alternative current then the armoring is manufactured with non magnetic material ( Aluminum wires or tapes )

Jacket
Polyethylene (PE) or Polyvinyl chloride (PVC).

These cables are manufactured also with special properties in fire condition as flame retardant, low or zero smoke and toxic gas emission. In other case, they shall be manufactured to satisfy requirement of any termite attached.

Type test report CEV 36kV

Catalogue
Medium Voltage Cables ( 6kV to 45kV )	Download