LSVINACABLE
Đang tải dữ liệu...
Home  /  Products  /  Terminations & Joint

Terminations & Joint

Introduction:
Termination of cable accessories that go along with the cables, used for the purpose of restoring the damage of cable. Composed mainly of rubber Silicone, fast construction follows the method of cold / heat Shrink. It is mainly used in construction,civil and industrial
electric. There are two types of cable (the cold shrink and heat shrink cable)

1. Cold Shrink Terminations

Cold Shrink Terminations for MV Cables with or without Armor, level voltage to 36kV.
Termination made ​​of Silicone Rubber fast method of constructionafter methord of cold shrink and is designed for all medium-voltage cables that have a metal shield structure, with or without borders, copper or aluminum core

-Scope of application:
• For medium-voltage cables up to 36kV
• For insulation cable: polyethylene, XLPE, EPR.
• For 1, 3-core cable, copper tape shield or copper fiber, with or without armor.
• Conductor core is copper or aluminum.
• Installation in the areas where environmental pollution.
• Used to connect to the switchgear, transformers, motors, bars, overhead lines...

Specification:

Termination is used for power cables with constant operating temperature at 90oC and overload.
at 130oC.

Rated current of Termination is equal or exceed the rated current of the cable used.
Termination built a special class with a high dielectric constant (High-K) to control the field electric around the cable insulation.
The field electric in the cable just under the High-K will be smaller than the case cable without High-K class.

2.Heat Shrink Terminations

Heat Shrink Terminations for MV Cables with or without Armor, level voltage to 40.5kV.
Termination made ​​of Silicone Rubber fast method of constructionafter methord of cold shrink and is designed for all medium-voltage cables that have a metal shield structure, with or without borders, copper or aluminum core

-Scope of application:
• For medium-voltage cables up to 36kV
• For insulation cable: polyethylene, XLPE, EPDM
• For 1, 3-core cable, copper tape shield or copper fiber, with or without armor.
• Conductor core is copper or aluminum.
• Installation in the areas where environmental pollution.
• Used to connect to the switchgear, transformers, motors, bars, overhead lines...

Specification:

Termination is used for power cables with constant operating temperature at 90oC and overload.
at 130oC.

Rated current of Termination is equal or exceed the rated current of the cable used.
Termination built a special class with a high dielectric constant (High-K) to control the field electric around the cable insulation.
The field electric in the cable just under the High-K will be smaller than the case cable without High-K classk

10kV 3x95SQ HST Indoor Termination clip.

http://www.youtube.com/watch?v=mOntB-qwIFg

.

Detail

Termination & Joint
Download